When you are using an NTFS drives on macOS Big Sur, are you not able to write to it? Are you not able to rename, edit, delete, and create files on the NTFS-formatted drive on the latest Mac operating system? Actually, the NTFS read-only issue is very common for Mac users, but it can be resolved very easily. Plus, you won't have to format the drive. This post will offer you three ways to have read & write access to NTFS drives on macOS Big Sur.
1. Using free NTFS driver for Mac
You can make use of free NTFS drivers for Mac in order to be able to read and write NTFS drives on Mac. Mac emulator for win 7. One such driver is FUSE. Here is the step by step guide.
Jan 19, 2021 iBoysoft NTFS for Mac features high integrity with macOS Finder. You can directly tag, airdrop, duplicate, rename, and move the files to Trash from an NTFS drive in Finder. You can also use the NTFS drive as the backup disk for your Time Machine backups. The deep integrity applies to Disk Utility as well. This fact makes it very likely that you'll need to write data to an NTFS-formatted drive from a Mac at some point or another. Luckily, NTFS write access can be enabled on a per-drive basis using.
Step 1: Download Xcode and install it
Jul 31, 2015 This fact makes it very likely that you'll need to write data to an NTFS-formatted drive from a Mac at some point or another. Luckily, NTFS write access can be enabled on a per-drive basis using. Step 2: Plug the NTFS drives on your Mac. Once the drive is detected, a Finder window with its content will pop out. Then you can read and write to NTFS drives as you wish. Solution 2: Use free NTFS drivers FUSE for macOS is the most famous free NTFS driver that can let you extend the list of file systems handled by your computer. First, download and install iBoySoft NTFS on your Mac. After that, restart your computer by clicking the Apple logo at the top-left corner of your screen, then select Restart. Once you've restarted your Mac, connect your NTFS device using a USB or Thunderbolt cable.
- Go to Finder, click on ‘Applications', followed by ‘Utilities' and then ‘Terminal'. Next run this command line : xcode-select –install
- You will then get a prompt and you have to click on ‘install'.
Step 2: Download Homebrew and install
- Enter the following command line in the terminal window and run it.
Enable Ntfs On Mac Shortcut
- Press enter to install. You will get a prompt for the password
Step 3: Download FUSE for macOS and install it.
- During installation use the default options.
Step 4: Install NTFS-3G
- Run the following in the terminal window and press Enter
brew install homebrew/fuse/ntfs-3g.
Step 5: Get SIP disabled
SIP or System Integrity Protection is meant to safeguard your OS from any kind of unauthorized changes. So, here is what you have to do to disable it,
- Restart your device and press the Command + R keys at the same time till the Apple logo appears.
- Go to the Utilities menu and open Terminal.
- Run : csrutil disable
- Press the Enter key and reboot your Mac.
Step 6: NTFS on Mac can now be edited
- Go to Finder, click on Applications, then Utilities and finally Terminal
- Run this:
- Press the Enter key
Apart from FUSE for MacOS, there are other free NTFS drivers for your Mac device. However, you would need to put in some extra effort to get going.
In case this is difficult for you, there are 2 more methods. So, don't lose heart just yet.
2. Use commercial NTFS drivers for Mac that are user-friendly
There are commercial NTFS drivers for Mac that are less complicated. However, you will have to shell out some money for them but they are easy to use and can save a lot of time! The list includes iBoysoft NTFS for Mac and NTFS Assistant.
iBoysoft NTFS for Mac
iBoysoft NTFS for Mac offers complete read-write support. It lets you rename, edit, delete, copy, paste, move or create files on NTFS drives on Mac with ease. It also offers high-speed file transferring. The experience you get is quite seamless and you won't feel any difference. It is just like using drive with a format supported by macOS.
Install mac os on windows 7. Here is how to go about it,
Enable Ntfs On Mac Os
Step 1: Download iBoysoft NTFS for Mac on your Mac device and install it.
Step 2: Connect the Mac computer with the NTFS drive.
Step 3: Upon getting the NTFS drive mounted, you can get started with the read-write actions.
3. Use command line to enable NTFS write support
The Mac OS has an experimental NTFS write support but you have to enable it to use it. By default it is disabled. You have to run command lines to do so. This is true but Apple has not made this official yet. This is because doing so can lead to the corruption of the disk or even permanent data loss. Therefore, this particular solution is risky and should be given a miss! It is not recommended but it is possible!
The Final Word
With this, we come to the end of all the solutions to get read & write access to NTFS drives on macOS. You have seen that you can use free NTFS drivers and commercially available drivers to help you get the read & write access.
They make it possible for you to rename, edit, delete, copy, paste, move or create files on the NTFS-formatted drive on Mac. The drivers would resolve the problem you have with sharing files between Mac and Windows with an NTFS drive.
The NTFS drivers that are totally free of cost require time, patience and effort from your end whereas the commercial ones are easy to use but require you to pay a small amount for the convenience offered. Also the paid ones like iBoysoft NTFS for Mac are more reliable than the free drivers. Choosing NTFS driver is totally up to you. If you have all the time in the world, you can go in for the free NTFS drivers and if you don't, go in for iBoysoft NTFS for Mac.
Introduction of NTFS on Mac
Write To Ntfs On Mac
NTFS-(New Technology File System) is a built-in system that helps mac users to read NTFS files and write access restrictions on the files. Besides, it has a hidden option that allows users to write support to NTFS formatted drives, but it requires high-level expertise to operate.
If any accidental error happens whole writing, the support will cause wrong actions and lead to bad results that will damage your Mac device. Moreover, Apple has not considered the hidden option to be a trusted platform. It is just an experimental utility for Mac users to transfer data between Windows and Mac operating systems.
Aside from all the risks that might cause data loss or damage to the NTSF drive, many Mac users still insist on getting full read and write support access. So if you are one of the Mac users who need to enable NTFS on Mac, we strongly recommend you perform a data backup first for all of your important data.
3 Simple Ways to Enable NTFS on Mac
We will show you three easy ways to enable NTFS on your Mac with different types of command lines.
Method 1: Drive UUID
Drive UUID is the best way to enable NTFS, but it can be a little complex compared to the second method, drive name.
Step 1: Connect the NTFS drive and access UUID by computing the command: diskutil info/Volumes/DRIVENAME | grep UUID (Remember to replace the DRIVENAME with your own drive name.)
Step 2: Type the command: 'UUID=ENTER_UUID_HERE none ntfs rw,auto,nobrowse' >> /etc/fstab' that will String the UUID result to Append the NTFS read or write support.
Step 3: Sometimes, the NTFS drive will not appear by default on your Mac, so you can retrieve it by accessing the folder at Finder from the /Volumes/ directory with the command: ‘open /Volumes‘
Step 4: Instead, you want to see the drive on your system, type the command: ‘sudo ln -s /Volumes/DRIVENAME ~/Desktop/DRIVENAME‘
Method 2: Drive Name
Suppose that the drive UUID is not effective; you can use the drive name to enable NTFS on Mac.
Step 1: Add NTFS write support by typing the command: ‘sudo echo 'LABEL=DRIVE_NAME none ntfs rw,auto,nobrowse' >> /etc/fstab‘ with the name of the Windows drives.
This method works together with the Sudo command, so you will need to input your admin password when executing the command. Moreover, it depends on the drive name at the end of the /etc/fstab file as /etc/, so it will need the superuser access to write the files in the file directory.
Suppose that the drive name is quite complicated; you can rename the NTFS drive in Windows first before mounting it with the writing support.
Step 2: Look through the /Volumes/ for the mounted Windows NTFS drive that had the read and write support. You can create a link on your OS X desktop by accessing the command: ‘sudo ln -s /Volumes/DRIVENAME ~/Desktop/DRIVENAME && open ~/Desktop/DRIVENAME‘ to access the NTFS drive that is mounted already.
Using Ntfs On Mac
Method 3: FUSE Application
Step 1: Go and download the FUSE and make sure to use the Default Option during installation. Then it will require Apple's command-line developer tool to continue the operation.
If you don't have the tool on your Mac, then go to Finder > Applications > Utilities to run the command: ‘xcode-select –install‘ and install the tools.
Additionally, you need to install the Homebrew package manager and type the command: ‘/usr/bin/ruby -e '$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)‘ at the Terminal window and press Enter. Then, enter your user password, and the installation will start automatically.
Step 2: When the Homebrew installation is complete, at the Terminal window, change the command: ‘brew install ntfs-3g‘ to Install ntfs-3g.
Step 3: Type the command: ‘sudo mkdir /Volumes/NTFS‘ to manually mount the read and write mode in the NTFS partition.
Step 4: After you attach the drive to your Mac, execute the command line: ‘diskutil list‘, and a list of disk partitions will appear.
Step 5: Check the partition at the Windows_NTFS file system to search for the NTFS partition which will state /dev/disk3s1.
Step 6: If the NTFS partition is mounted to your Mac automatically, you need to unmount it by replacing /dev/disk2s1 with sudo umount /dev/disk2s1.
Step 7: You need to mount the drive by executing the command: ‘sudo /usr/local/bin/ntfs-3g /dev/disk2s1 /Volumes/NTFS -olocal -oallow_other‘ and replace /dev/disk2s1 with your NTFS partition name.
Learn to Enable NTFS Now!
After learning the three effective ways above, you should be able to enable the NTFS on Mac easily! Bear in mind that all these ways are complicated and require a high computer knowledge level to execute the command.
Any minor mistakes can end up damaging your NTFS drive or permanent data loss. Therefore please operate the methods above with pro assistance or use FUSE to do the task!
How useful was this post?
Click on a star to rate it!
Average rating 5 / 5. Vote count: 1
No votes so far! Be the first to rate this post.
Previous Article
What's New in Bitwar iPhone Data Recovery V1.6.2.2 Summary: The text below will let Mac users understand the NTFS file system and three simple ways to enable NTFS on..Next Article
How to Fix This Memory Card Cannot Be Used Summary: The text below will let Mac users understand the NTFS file system and three simple ways to enable NTFS on..About Bitwar Data Recovery
3 Steps to get back 500+ kinds of deleted, formatted or lost documents, photos, videos, audios, archive files from various data loss scenarios.
Learn More